Irrigation rubber boot hose
Boot hose kits include 4-ply hose and two t-bolt clamps. The hose is made of reinforced neoprene fibre, which is highly resistant to cracking and marking. Specify inches: 4”, 4 1/2”, 5”, 5 9/16″, 6”, 6 5/8”, 8”, 8 5/8” and 10”.
Stainless steel T-bolt clamps are used to attach them, whose measurements correspond to the hoses: 4”, 4 1/2”, 5”, 5 9/16″, 6”, 6 5/8”, 8”, 8 5/8” and 10”.
This connection system guarantees a perfect seal to prevent water loss in pivot irrigation systems.
Rubber expansion joint
Absorb and dampen vibrations from pumping units and floating aspirations. Facilitate alignment between system components to allow deviations.
Absorb inherent noise in rigid couplings. Simplify the facility.